Electric Anchor Load Cell, stainless steel 17-4PH body with a center hole from 100 mm to 165 mm depending on the range, outside diameter from 160 mm to 250 mm, sensitized by strain-gauges to minimize the sensitivity to eccentric loads. Designed without distribution plate, it is not necessary! 

Ranges available: from 0 to 300 kN, 750 kN, 1000 kN, 1500 kN, 1800 kN, 2500 kN (0...250 tons) 

Output signal: 2mV/V of full scale 

Overload: 150% 

Accuracy: better then 0.08% of full scale 

Operating temperature: -20°C to 50°C

Supplied with a certificate and standard cable, 5 m.

Steel arch tunnel support Load Cell, stainless steel 17-4PH body outside diameter 160 mm, sensitized by strain-gauges to minimize the sensitivity to eccentric loads. 

Ranges available: from 0 to 500, 750, 1000 kN (50, 75, 100 tons) 

Output signal: 2mV/V of full scale 

Overload: 150% 

Accuracy: better then 0.08% of full scale 

Operating temperature: -20°C to 50°C

Designed with a spherical distribution plate.

Compression Load Cell, stainless steel body outside diameter 129 mm, height 175 mm (for 3000 kN), outside diameter 165 mm, height 230 mm (for 5000 kN), sensitized by strain-gauges to minimize the sensitivity to eccentric loads. 

Ranges available: 3000 kN or 5000 kN (300, 500 tons) 

Output signal: 2mV/V of full scale 

Overload: 150% 

Accuracy: better then 0.1% of full scale 

Ingress protection: IP67

Operating temperature: -20°C to 70°C

Hydraulic Load Cell for monitoring loads on and into steel arch tunnel support, stainless steel body, outside diameter from 150 mm to 240 mm, height 40 mm, filled with de-aired oil. 

Ranges available: 1000 kN, 1900 kN or 3000 kN (100, 190, 300 tons) 

Output signal: 4-20 mA 

Accuracy: better then 1% of full scale 

Operating temperature: -20°C ... 50°C

Supplied with a certificate and standard cable, 5 m.